INSTALLATION:
Open the EasyFIT connector, place the seat on the vehicle seat forward-facing. Focus the
2 EasyFIT connectors to the ISOFIX anchorages on vehicle seat, push to make it connect,
till you hear “Click”. Continue to push the child car seat, until it is close to the back of the
vehicle seat.
FIX THE CHILD AND THE BOOSTER SEAT:
After the child is placed into the booster, pull out the car belt, go under the armrest and
buckle it. On the buckle side, the shoulder belt must go above the armrest, and the lab belt
must go under the armrest.
(See the picture below)
WASHING INSTRUCTIONS:-
The cover can be washed by machine, please use warm water and neutral detergent.
Please note: To ensure the safety: the belts and shoulder pad are not allowed to be
removed and washed. To clean them please use the warm water or neutral detergent and
line dry only, or contact the agency to change.
