8.8 Outdoor Sensor Transmission
8.7
Activating and Deactivating Temperature Alert
When a channel is not connected to the remote sensor, the readings
of this channel will display “---”.
Please make the main unit stay in the same channel with remote
sensor.
When the current temperature exceeds the set HIGH&LOW tempera-
ture range, the alert alarm will be activated and sound for 5 seconds,
at the same time, the temperature value and alarm upper limit icon
“HI” or lower limit icon “LO” will be flash.
Press any button to stop the alarm, the alarm will be silent and
come on again if still exceeds the temperature range.
When the batteries are installed in the remote sensor, the main unit
will automatically connect to it.
The main unit can connect up to 3 remote sensors at the same time,
please make sure that the channels of the remote sensors are differ-
ent.
“UP” button in the main unit is the channel select button, keep
press “UP” button, the screen displays CH1, CH2, CH3, CYCLE mode
( there is a cycle symbol “ ” displayed next to CH, at this time, the
screen will cyclically display the readings of CH1, CH2 and CH3 every
5 seconds), press “UP” button again to back to CH1.
Press and hold “UP” button for 3 seconds to manually connect the
remote sensor, in the meantime, press the “TX” button of remote
sensor to speed up connection.
F.Y. I
13
