02
INITIAL
OPERATION
Plug in the original power cord or insert 3 x AAA batteries observing
polarity. All icons on the screen of main unit will light up for 3
seconds, you will hear a beep, and the main unit will begin to detect
the indoor temperature and humidity.
Open the battery compartment of outdoor sensor, choose a channel
for ourtdoor sensor (1, 2 or 3, and press “ UP” button to set the
channel of the main unit match to the outdoor sensor’s), insert 2 x
AA batteries observing polarity, then the outdoor sensor will begin
to detect the temperature and humidity. The LED light flashes once
indicating that the outdoor sensor sends a wireless signal once.
After the indoor temperature and humidity detection is completed,
the main unit will begin to establish a connection with the outdoor
sensor ( note: please keep the channel of the main unit and outdoor
sensor consistent). At this time, the RF icon “ ” will appear and
flash in the “Outdoor” display area of the main unit.
The main unit can be connected to 3 outdoor sensors at the same
time, please make sure that the channels of the outdoor sensors
are different.
To get a strong signal, we suggest that:
--- A minimum distance of 8 feet to all sources of interference,
such as televsions or computer monitors.
--- The reception is weaker in rooms with concrete walls (e.g.: in
cellars) and in offices. In such circumstances, place the deivce
close to the window.
F.Y. I
05
