1.36 Service mode, English
Service mode, English 1.37
PIN-code setting
- In this menu it is possible to activate (ON) or deactivate (OFF) the PIN-code. It is
only possible to access this menu if no pin code is set for BeoVision 5.
FBX status info
SW ver
Software version
HW id
Hardware version
Noise
Shows the strength of the TV tuner input. Zero indicates the best signal and 240 is
a very bad signal (snow).
Steep
A high number indicates a high sharpness in the signal. This means that the Digital
Luminance Peaking only has to perform small adjustments to obtain a sharp
picture.
Demo Off/On (default Off)
Demo of how the compensation of movements in the picture (Motion
Compensated Picture) works.
Debug Off/On (default Off)
Red coloured bars in the side of the picture indicates Video mode and blue
indicates Movie mode.
Modulator system
When replacing the EEPROM 6IC6, PCB6 or PCB14 where PCB6 is mounted, the
modulator system
must
be set to the correct system B/G or I.
Plasma version setup
It is possible to select which plasma display version there is used.
Possible versions:
D5 8200125-I
D6 8200142
SW ver HW id Noise
Steep
Demo
Debug
148
251
240
126
Off
Off
Modulator system
System
BG
Plasma version setup
Plasma version
D6 8200142