> Using the radio
26
Press to turn on the radio program
you want to fine tune
Press to start the fine tuning
function
Press to fine tune your program
towards a higher or lower frequency
Press to accept your fine tuned
program
Press again to store program and
program number
Fine tuning a radio station
If the radio station is not tuned in
clearly enough, it may be because the
station needs to be fine tuned.
The fine tuning function enables you
to move slowly through the
frequencies, or to detune a station
slightly because of noisy reception.
Just follow the instructions to the left,
and listen carefully as you proceed...
Once you have fine tuned your
program, you can choose a different
program number for your radio
program if you like before you store it.
Please refer to
Presetting radio
stations
on page 24 for further
information.
Press to turn on the relevant radio
program
Press to choose
MONO
or
STEREO
Press to switch from stereo to mono
Press to store your new tuning on
the program number
Mono/stereo reception
If you have tuned in to an FM station
broadcasting a stereo signal, this signal
will be stored along with the radio
program.
Your BeoSound 9000 automatically
switches to mono if the stereo signal is
not strong enough to produce an
acceptable stereo sound.
However, you can overrule this
automatic function if you wish and
select mono manually. See how to do it
on the left of this page.
The choices for the settings are indicated on the
displays – stereo or mono sound
RADIO
TUNE
TUNE
then
TUNE
TUNE
then
TUNE
then
OK
then
OK
RADIO
OK
then
or
▲
▼
or
then
▲
▼