N I C E T O K N O W
40
Adjusting sound
Press to access the treble adjustment
function
Press to access the bass adjustment
function
Press to access the balance
adjustment
Press to raise or lower the treble or
bass levels; or adjust the balance
between the left and the right
speaker
Press to see the status of the
loudness adjustment function
–
LOUDNESS ON
or
LOUDNESS OFF
.
Press LOUDNESS again to change the
setting
Press to accept all sound levels –
SOUND OK?
appears on the display
Press to store all sound levels
If you have not stored your sound
adjustments...
Press to reset the sound levels to
their previously stored settings
You can adjust the sound to suit your
personal taste and you can store the
adjustment as a permanent setting if
you like.
All you have to do is press the relevant
buttons on the panel and use the
▲
or
▼
buttons to adjust the sound.
The treble and bass levels can be raised
or lowered as you like and you can
alter the balance, that is, the distribu-
tion of sound emerging from the
loudspeakers to suit your listening
position.
The BeoSound 9000 also features a
loudness function which you can cut in
or out as you like, please refer to the
following page for further information
about loudness.
You can press RESET any time to reset
the sound levels to their original
settings.
However, if you want to turn your
adjustment into a permanent setting
of the BeoSound 9000, just press OK,
and the display reads
SOUND OK?
. Then
press OK one last time to store your
new sound setting.
BEO4
Press to raise or lower the
volume
Press volume up and down at the
same time to mute speakers,
press again to activate speakers
Press to display
A.SETUP
* to adjust
sound
Press to reveal
BASS, TREBLE
or
LOUDNSS
Press to adjust the treble or bass
levels or set loudness to on or off
Press to display
S.STORE
to store
your adjustments
Press to reveal
SPEAKER
and
adjust balance
Press to adjust the balance
between the left and the right
speaker
To store your balance adjustment…
Press LIST repeatedly to display
A.SETUP
*
,
then press GO, now press LIST to display
S.STORE
and press GO to store your
adjustment.
*Note: In order to display
A.SETUP
on
Beo4, you have to add this function to the
Beo4 list of functions, please refer to the
Beo4 User’s guide and the chapter
Customizing your Beo4
for further
instruction.
LIST
LIST
LIST
or
and
GO
then
then
or
then
or
then
tt
ss
TREBLE
BASS
BALANCE
or
▲
▼
LOUDNESS
OK
OK
then
RESET
LIST
GO
then