Mounting 5
Mounting
The BeoLab Transmitter 1 can be mounted in various ways:
- On a shelf or similar horizontal surface.
- Wall mounted.
Note: Product Status LED on front of BeoLab Transmitter 1, and WIRELESS LED on the rear side.
Wall mounting
The BeoLab Transmitter 1 can be mounted on a wall by using the cable cover as wall bracket.
Two screws are placed with a distance of 260 mm/ 10.6”.
See also the setting-up guide enclosed in the packaging for the BeoLab Transmitter 1.
The BeoLab Transmitter 1 can be placed vertically or horizontally. The cable cover is naturally used for organizing the cables.
See example in the below illustrations. (The holes for mounting shown are placed on the back side of the BeoLab Transmitter 1).
Demount from wall mounting
The BeoLab Transmitter 1 is demounted from the cable cover by releasing the two snap-locks
, followed by moving the transmitter away from
the cable cover
.