Use or USB memory stick - SW update 21
Mending a SW update error
If an error occurs - the product status LED indicator is flashing orange. Also the LED over the Power Link connector for the actual speaker will be
quickly flashing green, and likewise the white or red LED for the sound channel will be flashing.
To mend the SW update error - do the following:
- Disconnect the BeoLab Transmitter 1 and disconnect all wireless speakers where the LED is quickly flashing green from the mains for at least 60 s
- Reconnect all wireless speakers to the mains
- Reconnect the BeoLab Transmitter 1 to the mains
- Re-do the SW update of the speakers.
WIRELESS LED indications during speaker update
State
Signal
Time
Comment
Speaker update
Red
(slow flashing)
200 ms/200 ms
FEP SW in processor 1
Speaker update
Orange
(slow flashing)
200 ms/200 ms
Wireless Power Link Rx SW in processor 2
Speaker update
Green
(slow flashing)
200 ms/200 ms
DSP SW in processor 3
(See
page 4
)