8
In order to avoid running cables
from both speakers to your recei-
ver, TV set or MCL 2 AV, you may
loop the signal through as illu-
strated:
Using one Power Link cable,
connect one speaker to your
receiver, TV set or MCL 2 AV.
Using the other Power Link
cable, connect the speakers to
one another.
SPEAKER LINK
SPEAKER LINK socket
(using a
shielded
cable with 2-pin,
3-pin or 4-pin DIN speaker plugs)
Plug one end of the cable into
the SPEAKER LINK socket on the
Beolab Penta.
Plug the other end of the cable
into the appropriate socket on
your receiver, TV set or MCL 2
A/2 AV.
Repeat the procedure for the
other speaker.
AUDIO/VIDEO switch
In order to obtain the correct
status reading from the display,
the AUDIO/VIDEO switch must be
set to the correct position:
AUDIO if the Beolab Penta is
connected to a Beomaster,
Beocenter or MCL 2 A/2 AV.
VIDEO if the Beolab Penta is
connected to a Beovision.
Содержание BeoLab Penta
Страница 1: ...B E O L A B P E N T A ...
Страница 19: ...3506182 0982 Printed in Denmark by Bogtrykkergården a s Struer ...