16
Status reading on recording
Missing source
Recording pause:
A-REC
22
RADIO 10
22
Recording in progress:
A-REC
22
RADIO 10
22
LOAD
CD
Shown alternately at short intervals
Shown for 5 seconds after the recording
has started and is then followed by
Remains in the display as long as
recording is in progress
If, during a recording, you adjust the sound,
the above sequence is repeated afterwards.
Shown alternately 3 times at short intervals
Dynamic Clipping Attenuator
The Beolab Penta features a spe-
cial circuit called Dynamic Clipping
Attenuator.
Clipping is a form of output
signal distortion which occurs in
cases of severe overloading of the
amplifier. The peaks of the audio
waveform will be clipped if an
amplifier is unable to reproduce
extreme input levels (transients).
To resolve this problem, Bang &
Olufsen developed the Dynamic
Clipping Attenuator. It ensures
that the clipping of the output
signal takes place with much less
audible distortion than would
otherwise be the case.
Содержание BeoLab Penta
Страница 1: ...B E O L A B P E N T A ...
Страница 19: ...3506182 0982 Printed in Denmark by Bogtrykkergården a s Struer ...