Accessories
58
Mobile Panel 7200 User's manual V 1.01
7 Accessories
The following accessories have undergone functional testing by B&R in connection with the device used and can
be operated with this device. Possible limitations regarding operation with individual components other than the
complete system must be taken into account, however. All individual specifications of the components must be
observed when operating the complete system.
All components listed in this manual have undergone intensive system and compatibility testing and been approved
accordingly. B&R cannot assume any functional warranty for accessories that have not been approved.
7.1 USB flash drives
7.1.1 5MMUSB.xxxx-01
7.1.1.1 General information
USB flash drives are easily replaceable storage media. Due to the fast data transfer (USB 2.0), USB flash drives
offer optimal values for use as portable storage media. Without additional drivers, the USB flash drive immediately
reports itself as another drive from which data can be read or to which data can be written (hot plugging).
Information:
Due to the large number of USB flash drives available on the market and their short lifecycles, we
reserve the right to supply alternative products. It may therefore be necessary to take the following
measures in order to also boot from these USB flash drives:
•
The USB flash drive must be reformatted or, in some cases, repartitioned (set partition as ac-
tive).
•
The USB flash drive must be in the first position in the boot sequence; alternatively, the IDE
controllers can be disabled in BIOS. In most cases, this can be avoided by running "fdisk / mbr"
on the USB flash drive.
7.1.1.2 Order data
Model number
Short description
Figure
USB accessories
5MMUSB.2048-01
USB 2.0 flash drive 2048 MB B&R
5MMUSB.4096-01
USB 2.0 flash drive 4096 MB B&R
Table 12: 5MMUSB.2048-01, 5MMUSB.4096-01 - Order data
7.1.1.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
5MMUSB.2048-01
5MMUSB.4096-01
General information
Capacity
2 GB
4 GB
LEDs
1 LED (green)
1)
MTBF
>3,000,000 hours
Type
USB 1.1, USB 2.0
Servicing
None
Default file system
FAT32
Certifications
CE
Yes
Table 13: 5MMUSB.2048-01, 5MMUSB.4096-01 - Technical data
