Software
50
Mobile Panel 7200 User's manual V 1.01
Information:
The following behavior must be observed when creating an application with an MP7200.
Sleep mode (standby) is only available with limitations:
•
If ADI values (such as operating hours) are accessed with an application and the device is put into stand-
by mode, the device may not wake up again. The MP7200 must then be briefly disconnected from the
power supply and rebooted.
•
For applications that access ADI values (e.g. operating hours), it may not be possible to read these values
after coming out of standby mode. The application must then be restarted.
Hibernate mode is limited as follows:
•
If ADI values (e.g. operating hours) are accessed via an application and the device is put into hibernate
mode, a blue screen may appear during the boot procedure after waking up the PC.
•
For applications that access ADI values (e.g. operating hours), it may not be possible to read these values
after hibernating. The application must then be restarted.
4.2.1.8 Supported display resolutions
Per Microsoft requirements, Windows 10 IoT Enterprise 2016 LTSB requires SVGA resolution (800 x 600) or higher
to enable full operation of the Windows user interface (including system dialog boxes, apps, etc.). A lower resolution
can be selected for applications.
4.3 Automation Device Interface (ADI)
The Automation Device Interface (ADI) enables access to specific functions of B&R devices.
Information:
On the MP7200, administrator rights are required to access ADI functions.
