Appendix B: FAQ
79
Q: How do I configure the settings when I use xDSL to link the router?
A: 1. PPPoE: Go to the GUI
Internet > Basic Setting > Ethernet
Setting
. Change Connection Type to PPPoE. Enter the Username
and Password provided by your ISP. Remember to connect your
xDSL or Modem to the WAN Port on your Router.
2. Static IP: Go to the GUI
Internet > Basic Setting > Ethernet
Setting
. Change Connection Type to Static IP. Enter the
information in the blank provided by your ISP. Remember to
connect your xDSL or Modem to the WAN Port on your Router.
Q: Can I prevent others from using my router?
A: Yes, there are some ways to prevent others from using your router.
1. Enable your WiFi client filter.
2. Disabled your SSID Broadcast.
3. Setting your WiFi security.
Q: My PIN code is enabled and where can I input the PIN code to use my
Router?
A: Click the menu tabs
Network
Mobile Internet
U/SIM PIN
Management
; enter your PIN Code and click
.
Q: Why does my U/SIM status display
“PIN Disable”
?
A: Check that the SIM card (which is properly
activated by your mobile internet service provider) is
inserted correctly in your router.
Q: Where can I change the password of the router?
A: Click the menu tabs
System
Administration
. Enter the new
password twice (set and confirm) and click
.
