BANDELIN TRISON Series, Инструкция по планированию проекта, Инструкция по установке

Страница: 17 / 25

Connector
View:
As seen from the back
View:
As seen from the back
TRISON Twist 4000 Xi R TRISON Twist 4000 Si R
Support for bolts in the
ultrasonic oscillating tank
61279e GB/2018-03 17 / 25
1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
• Hold the TRISON Lift from the base and slide it from its guide onto the base plate,
until the dead stop is reached (it clicks into place).
• Attach the TRISON Twist moving device in accordance with the TRISON instructions
for use (no special mounting required – simple suspension).
• Hold the Twist from the handle and lower into the ultrasonic oscillating tank. Check
that it is not bumping or rubbing laterally against the oscillating tank. Exception: With
its supports, the Twist 4000 Si may rest on the bolts in the oscillating tank.
If it makes contact with the oscillating tank, swivel the Twist upwards and remove.
Remove the screws on the Twists connector, reposition the connector slightly, then
re-tighten. Conduct this adjustment as long as needed, until the Twist is centrally
positioned in the ultrasonic oscillating tank and can be swivelled.