BANDELIN TRISON Series, Инструкция по планированию проекта, Инструкция по установке

Страница: 10 / 25

L
U
× B
U
L × B ±2
Over fl ow edge
L
U
×B
U
Cut-out in the laminate
board/work surface
Seal
Tank edge, exterior
Tank
10 / 25 61279e GB/2018-03
1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
4 Mounting of the tank
When choosing a suitable fi xation to fasten the tanks to the work surface, it is important
to take into account the weight during cleaning (weight of tank when empty + fi lling
basket with goods to be cleaned).
The fastening of the tank to the work surface must be designed to accommodate the
following weight as a minimum:
TE 3000

84 kg
4.1 Creating the cut-out
For the tank, over fl ow edges with the following dimensions must be produced through
appropriate cut-outs in the work surface:
CAUTION – note the tank's corner radius "R"!
Type
Interior dimensions / tank
Over fl ow edge (exterior)
External dimensions
R L B L
U
B
U
TE 3000 20 770 420 766 416
All measurements given in mm