10 / 43
51806-001 en/2021-12
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
Ambient conditions
Overvoltage category:
II
Degree of contamination:
2
Permissible ambient temperature:
5 to 35 °C
Permissible relative humidity:
80 %
Altitude:
up to 2000 m above sea level
No dewing.
Only for indoor operation.
Electromagnetic compatibility (EMC)
The device has been checked for electromagnetic compatibility (EMC) in accordance
with DIN EN 61326-1 and meets the requirements for Class B devices in accordance
with EN 55011.
Suitable for use in institutions and other areas that are directly connected to a public
low-voltage power supply, e.g., laboratory facilities.
1.5
Warnings and safety instructions
General
• Keep the ultrasonic bath out of the reach of children and of persons who have not been
instructed in its operation by reference to these instructions.
• We will not o
ff
er any guarantee for damages to the ultrasonic bath or oscillating tank,
or to the objects to be treated, as a result of use of inadequate disinfection agents
or detergents.
• Do not expose the ultrasonic bath directly to sunlight and do not position it in the vicinity
of heat sources.
• Keep the surface of the ultrasonic bath and operating elements clean and dry.
• Do not expose the ultrasonic bath to corroding in
fl
uences.
• Move the ultrasonic bath only when it is empty.
•
Empty the ultrasonic bath only while turned o
ff
.
• Ultrasonic baths adhere to prescribed EMC limit values, such that it can be assumed
that the electromagnetic radiation emanating from the devices is harmless to humans.
A binding statement for wearers of implants can only be made at the place of work
and together with the implant manufacturer. In case of doubt, information regarding
the allowable electromagnetic exposure level should be obtained from the implant
manufacturer.
