B&B VESR901, Руководство пользователя

Страница: 29 / 60

29
The number of Data bits, type of Parity and number of Stop bits selected define the
serial port parameters at which the serial server will operate. These parameters must
be configured to match the parameters set on the serial device connected to the
serial server's serial port.
Data Bits
controls the number of bits of data in each character. Options include 5, 6,
7 or 8 data bits.
Parity controls the error checking mode. Options are No Parity, Odd, Even, Mark or
Space.
Stop Bits controls the number of bits to indicate the end of a character. Options
include 1, 1.5 and 2. (1.5 bits is only valid when 5 data bits is selected, which is rare.
The 2 stop bits setting is only valid when 6, 7 or 8 data bits is selected.)
DEFAULT GATEWAY
The
Default Gateway address sets the default route to remote networks, enabling
users to access the serial server from outside the local network.
DELIMITER 1, DELIMITER 2 AND DELIMITER REMOVAL
Delimiters and Delimiter Removal enable you to control how characters received on
a serial port are sent across the network. Delimiters are ASCII characters specified by
the user when configuring the serial server. The serial server takes action when it
recognizes the specified character(s) on its serial port.
DELIMITER 1
Delimiter 1 is a
start delimiter.
The range of ASCII values is 0 through 255.
DELIMITER 2
Delimiter 2
is an
end delimiter
. The range of ASCII values is 0 through 255.
DELIMITER REMOVAL