B&B VESR901, Руководство пользователя

Страница: 19 / 60

19
CONNECTING THE VESR901-X
The
VESR901-x has one serial connection that supports RS-232, RS-422 and RS-485
(2- and 4-wire). The unit has two connectors: a DB-9M connector and a 5-position
terminal block.
If you select RS-232 mode when you configure the serial server, you must connect
the serial device to the serial server via a serial cable. The VESR901 is a DTE. If the
serial device is a DTE, use a null modem (cross-over) cable. If the serial device is a
DCE, use a straight-through cable.
If you select RS-422 mode, RS-485 2-wire mode, or RS-485 4-wire mode when you
configure the serial server, you must connect the serial device appropriately, via the
5-position terminal block.
Note: Refer to Appendix D for connector pinout information.
VESR901 Connections
CONNECTING THE VESR902T-X
The
VESR902T-x has two serial connections that support RS-232, RS-422 and RS-485
(2- and 4-wire). The unit has two connectors, both of which are 5-position terminal
blocks. Make the appropriate connections to the terminal blocks to match the serial
connection mode you select when configuring the serial server.
Note: Refer to Appendix D for connector pinout information.