Bandai Namco Time Crisis 5, Руководство по эксплуатации, Страница: 4 / 194

1. Safety Precautions – Be sure to read to ensure safe operation –
4
1-3 Critical Safety Precautions
●
Should an abnormality occur, turn off the power switch immediately to stop operations. Then, be sure to
disconnect the power cord plug from the outlet.
Operating the machine while the abnormality persists may result in fire or accident.
●
Dust accumulating on the power cord plug may result in fire. Inspect the plug regularly and remove any
dust.
●
Fully insert the power cord plug into the outlet. Poor contact may generate heat and result in fire or
burns.
●
Damage to the power cord may result in fire, electric shock or electrical leakage. Be sure to observe the
following.
• Keep the power cord away from heaters.
• Do not twist the power cord.
• Do not forcibly bend the power cord.
• Do not alter the power cord.
• Do not bundle the power cord.
• Do not pull the power cord. (Always unplug by holding the plug and not the power cord.)
• Do not place objects on the power cord.
• Do not allow the power cord to be caught between the machine and other devices or the wall.
• Do not do anything else that might damage the power cord.
●
Do not expose the power cord and power cord plug to water. Doing so may result in electric shock or
electrical leakage.
●
Do not touch the power cord plug with wet hands. Doing so may result in electric shock.
●
The maximum current consumption of 9 A is the machine's power capacity. To prevent fire and electric
shock, use indoor wiring that conforms to these power supply specifications.
●
Operate the machine using a power supply voltage in the range of 110 to 130 VAC. Using a voltage
outside this range may result in fire or electric shock. To ensure that the machine operates in optimum
conditions, try to maintain the power supply at 120 VAC.
●
In order to ensure this machine is used safely, be sure to perform the pre-operation inspection (P-34 "7-4
Pre-operation Inspection") and service (P-84 "8B. Service") described in this Operation Manual.
Omitting these inspections or service may result in an accident.
●
Use the consumables and service parts (including screws) that are specified by BANDAI NAMCO Games
Inc. To order parts, contact your distributor.
●
Do not modify the machine without permission. Do not perform any operations that are not described in
this Operation Manual. Modifying the machine may create unforeseen hazards.
●
The machine has been manufactured according to Japanese specifications and thus it does not comply
with standards used outside of Japan. It must only be used in Japan. Using it outside of Japan may lead
to unforeseen hazards.
●
If you decide to transfer the ownership of this machine, be sure to provide this Operation Manual with
the machine.
WARNING