Bandai Namco Time Crisis 5, Руководство по эксплуатации, Страница: 27 / 194

27
1
2
3
4
5
6
7
8A
8B
9
10
11
Moving and T
ransportation
12
Test Mode
Tro
ub
les
ho
otin
g
6. Moving and Transportation
●
This machine cannot be moved while it is installed. Attempting to move or transport the machine without
disassembling it may result in an accident. Move or transport the machine according to the instructions
in this Operation Manual.
●
Do not leave the machine on a slope. Otherwise, it may tip over or cause an accident.
WARNING
6-1 Moving (Within the Same Floor)
●
When moving the machine, disassemble it into the monitor tower (L) and (R) assemblies,
coin box assembly, signboard (L), (R), and (C) assemblies, gun tower (L) and (R)
assemblies, and pedal assemblies.
●
Even when only moving the machine a short distance, be sure to raise the level adjusters
of the monitor tower (L) and (R) assemblies, and gun tower (L) and (R) assemblies to their
highest level. (See P-77 "8A-4 Level Adjuster Adjustment".)
●
The overall height of the monitor tower (L) and (R) assemblies is approximately 1,890 mm.
Note the height of doors.
●
Move the machine carefully to avoid damaging it.
●
Do not subject the machine to impact when moving it down from an elevated position.
●
When moving the machine using the casters, do not forcibly push it over bumps.
●
Exercise care not to allow the gun assembly to drop.
●
Exercise care not to allow the gun assembly tube to get caught and pulled.
Monitor tower (R) assembly
Travelling direction
Fixed caster
swivel caster