Bandai Namco Time Crisis 5, Руководство по эксплуатации, Страница: 107 / 194

8B. Service
107
- Must be performed by a technician -
Test Mode
Tro
ub
les
ho
otin
g
1
2
3
4
5
6
7
8A
8B
9
10
11
Service
(11) Replacing ohmic sensors
* This section explains the procedure applicable to the monitor tower (L) assembly. Repeat the procedure
for the monitor tower (R) assembly.
●
In order to avoid electric shock, accident or injury to yourself or others as well as damage to the
electronic circuits, be sure to turn off the power switch before starting this task.
WARNING
●
PC boards are vulnerable to static electricity. If a person handles a PC board while charged
with static electricity, the parts on the PC board may be damaged. Before handling a PC
board, discharge the static electricity from your body by touching the surface of grounded
metal.
1
Turn off the power switch.
(See P-81 "8A-8 Turning the Power Switch On".)
2 Remove the monitor glass.
(See P-104 "(10) Replacing the monitor glass".)
3
Disconnect the two connectors from the ohmic sensor to be replaced, remove the two
Phillips pan head screws (with flat and spring washers) (M3 x 20) and remove the ohmic
sensor.
Connectors
Phillips pan head screws
(with flat and spring washers)
(M3 x 20)
Capacitor (must face the outside of the monitor)
Ohmic sensor