IT1000-C / IT2000-C
1/4” IT
Tool
www.BAND-IT-IDEX.com
Document # P49050 Rev. C
© Copyright
BAND-IT-IDEX, Inc. 2015
All rights reserved
Page 19 of 36
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Operating
Manual
• Using a hex key (supplied), adjust the handle to ergonomically match the
operators hand.
Hex Key
Adjustable Handle for Hand Use
• Be sure not to adjust the handle too far
outward (beyond interlocking legs) or the
handle will not function properly or
provide support to the operator.
Tool Ergonomics
•
Tool weight
– 5 Pounds (2.3 Kg)
•
A Neutral wrist position is recommended
•
A bent wrist can cause operator fatigue, and tool misuse
•
Any fixture design should attempt to replicate the natural
human wrist / elbow / shoulder motions that would occur
when operating the tool in the hand-held configuration,
allowing the tool to float along a plane through the entire
Tension (pull-up) and Cut-Off (lock) process.
