Bamo TURBISWITCH GS5, Руководство пользователя

Страница: 9 / 9

MAINTENANCE
In-line measuring cells:
• Dirty glass discs must be cleaned to insure a correct measurement.
• The TURBISWITCH GA… measuring cell is supplied with a key tool for loosening the compression disc.
• The glass disc is removed from the cell with the suction cup.
• Drain the measuring cell completely before performing any maintenance or cleaning work!
• Do not use any objects or cleaners that might damage the glass disc!
• Lime scale can be removed with available light limescale remover.
• The side of the glass disc marked with a dot must be installed that it faces the medium!
• Check the seals (O-rings) for damage and replace them if necessary before start-up!
• The frequency of cleaning routines depends on operating conditions.
Measuring cell Glass disc O-ring Compression disc Emitter or receiver
The side with the dot has an anti-fouling coating. Install this side that it faces the medium!
TUR
19-08-2021 M-410.03-EN-AA
410-03
/9
Turbidity Limit Value
Evaluation Unit
TURBISWITCH GS5
22, Rue de la Voie des Bans · Z.I. de la gare · 95100 ARGENTEUIL
Tel
Fax
+33 (0)1 30 25 83 20
+33 (0)1 34 10 16 05
Web
E-mail
www.bamo.eu
export@bamo.fr
INTERNATIONAL