DP0003c
CONTROLS: ROTARY/PUSHBUTTON SELECTOR
Turn
In menu level 0 the selected limit value is displayed and can be changed.
In menu level 1 reset hysteresis (HY), delay time (TD) or temperature monitoring (TP) can be selected.
In menu level 2 desired values for reset hysteresis and delay time (0.1 to 9.9 seconds) can be selected.
Anticlockwise rotation: -
Clockwise rotation: +
Press
Press to select submenus.
Pressing the button in submenu 2 returns the display to menu 1.
Note:
Changed settings are saved immediately!
If the rotary/pushbutton selector is not operated for more than 7 seconds, the display returns automatically to menu level 0.
Menu structure
Turn switch
Press switch
LED Off
LED On
Threshold value display low
Threshold value display med
Threshold value display high
0-100
0-100
Hysteresis selection
Time delay selection
Temperature monitoring
Hysteresis 1...25%
Time 0.1...9.9s
on / off
back to
level 1
back to
level 1
back to
level 1
0
1
2
SETTING THE THRESHOLD, LIMIT VALUE AND COMMISSIONING
Adjustment takes place after installation and electrical connection.
If problems arise, see “Troubleshooting”.
All steps must be carried out in chronological order!
Detecting the transition from the clear phase to sludge:
1. Turn the rotary/pushbutton selector on the evaluation unit clockwise as far as it will go until the display indicates 100% in the HIGH range.
3 LEDs light up yellow.
2. Fill the measuring cell with the clear phase or immerse the probe into the clear phase (blue LED is off).
3. Turn the rotary switch anticlockwise (-) until the blue LED lights up.
4. Slowly turn clockwise (+) until the blue LED goes out.
The device now reacts as soon as the medium becomes slightly more turbid.
5. To prevent the TURBISWITCH GS5 from reacting to extremely slight deviations, adjust the switching point a bit further in the clockwise
direction (+) (approx. 5 to 20 %).
TUR
19-08-2021
M-410.03-EN-AA
410-03
/7
Turbidity Limit Value
Evaluation Unit
TURBISWITCH GS5
22, Rue de la Voie des Bans · Z.I. de la gare · 95100 ARGENTEUIL
Tel
Fax
+33 (0)1 30 25 83 20
+33 (0)1 34 10 16 05
Web
www.bamo.eu
INTERNATIONAL