Bambi 007912, Руководство по обслуживанию

Страница: 16 / 91

Section 3: Accessories
Bambi MAX Service Manual
– Models HL4000-HL9800 11
Section 3: Accessories
Accessories are optional. Not included with the bucket.
Foam Injection Systems
Sacksafoam is a foam injection system that uses a pump to dispense a controlled amount of foam
concentrate from a reservoir into the water in the bucket. The operation of the Sacksafoam is controlled
by the pilot through a control unit, which is mounted in the cockpit. There are two models of Sacksafoam
available depending on the location of the foam concentrate reservoir.
Sacksafoam Bladder
The Sacksafoam Bladder uses a collapsible reservoir located
in the bucket. An internal check valve stops water from
flowing into the bladder and ensures that foam is dispensed
only while the injection pump is operating. Because the
foam in the bladder displaces the water in the bucket, the
total gross weight is always constant.
The Sacksafoam Bladder interfaces with the Sacksafoam
controller. Dispensing can be controlled directly from the
controller screen or a remote switch.
Bucket
Model
Part #
Reservoir Capacity Gross Weight
Power
Imp Gal USG Liters lb kg
BBXHL4000
004340 60 72 272 327 146
5 A @
28 VDC
BBXHL5000
See the following chart for recommended longline wire sizes for the Sacksafoam Bladder.
Wire Length
Wire Type
Connectors
Feet Meters Top Bottom
0
–100
0
–30
14/2 SOW NEMA 1-15P NEMA 1-15R
100
–200
30
–61
12/2 SOW NEMA 1-15P NEMA 1-15R