baltur TBG 80 LX ME /V, Инструкция по установке, использованию и обслуживанию

Страница: 69 / 92

MAINTENANCE TIME
Part description Action to be performed Gas
COMBUSTION HEAD
ELECTRODES
VISUAL INSPECTION OF THE INTEGRITY OF CERAMICS. TIP GRINDING, CHECK DISTANCE,
CHECK ELECTRICAL CONNECTION
YEARLY
FLAME DISC INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING, YEARLY
IONISATION PROBE
VISUAL INSPECTION OF THE INTEGRITY OF CERAMICS. TIP GRINDING, CHECK DISTANCE,
CHECK ELECTRICAL CONNECTION
YEARLY
COMBUSTION HEAD COMPO-
NENTS
INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING, YEARLY
INSULATING GASKET SEAL VISUAL INSPECTION AND POSSIBLE REPLACEMENT YEARLY
GAS DELIVERY COUPLING
SEAL
SEAL VISUAL INSPECTION AND POSSIBLE REPLACEMENT YEARLY
AIR LINE
AIR GRILLE/DAMPERS CLEANING YEAR
AIR DAMPER BEARINGS GREASING, (Note: apply only on burners with bearings requiring lubrication) YEAR
FAN FAN AND SCROLL CLEANING, DRIVE SHAFT GREASING YEAR
AIR PRESSURE SWITCH CLEANING YEAR
AIR PRESSURE PORT AND
PIPES
CLEANING YEAR
SAFETY COMPONENTS
FLAME SENSOR CLEANING YEAR
GAS PRESSURE SWITCH FUNCTIONAL INSPECTION YEAR
VARIOUS COMPONENTS
ELECTRIC MOTORS COOLING FAN CLEANING, BEARING NOISE CHECK YEAR
MECHANICAL CAM CHECK OF WEAR AND OPERATION, GREASING OF SLIDING BLOCK AND SCREWS YEAR
LEVERS/TIE-RODS/BALL
JOINTS
CHECK OF ANY WEAR, COMPONENT LUBRICATION YEAR
ELECTRICAL SYSTEM CHECK OF CONNECTIONS AND TERMINAL TIGHTENING YEAR
INVERTER COOLING FAN CLEANING AND TERMINAL TIGHTENING YEAR
CO PROBE CLEANING AND CALIBRATION YEAR
O2 PROBE CLEANING AND CALIBRATION YEAR
COMBUSTION HEAD EX-
TRACTION KIT
CHECKING WEAR AND OPERATION YEAR
FUEL LINE
GAS FILTER REPLACING THE FILTERING ELEMENT YEAR
HYDRAULIC/GAS SEALS CHECK OF ANY LEAKAGES YEAR
COMBUSTION PARAMETERS
CO CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
CO2 CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
BACHARACH SMOKE INDEX
CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP n.a.
NOX CONTROL COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
IONISATION CURRENT CON-
TROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
SMOKE TEMPERATURE
CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
GAS PRESSURE REGULATOR PRESSURE MEASURED AT START-UP YEAR
IMPORTANT
In case of heavy-duty operation or when using special fuels, the maintenance intervals must be reduced adapting them to the real opera -
ting conditions, according to the indications of the maintenance technician.
ENGLISH
23 / 44
0006081328_202001