baltur TBG 2000 LX ME, Инструкция по установке, использованию и обслуживанию

Страница: 57 / 68

MAINTENANCE TIME
Part description Action to be performed Gas
COMBUSTION HEAD
ELECTRODES
VISUAL INSPECTION OF THE INTEGRITY OF CERAMICS. TIP GRINDING, CHECK DISTANCE,
CHECK ELECTRICAL CONNECTION
YEAR
FLAME DISC
INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING, YEAR
IONISATION PROBE
VISUAL INSPECTION OF THE INTEGRITY OF CERAMICS. TIP GRINDING, CHECK DISTANCE,
CHECK ELECTRICAL CONNECTION
YEAR
COMBUSTION HEAD
COMPONENTS
INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING, YEAR
INSULATING GASKET
SEAL VISUAL INSPECTION AND POSSIBLE REPLACEMENT YEAR
GAS DELIVERY COUPLING SEAL
SEAL VISUAL INSPECTION AND POSSIBLE REPLACEMENT YEAR
AIR LINE
AIR GRILLE/DAMPERS
CLEANING YEAR
AIR DAMPER BEARINGS
GREASING, (Note: apply only on burners with bearings requiring lubrication) YEAR
FAN
FAN AND SCROLL CLEANING, DRIVE SHAFT GREASING YEAR
AIR PRESSURE SWITCH
CLEANING YEAR
AIR PRESSURE PORT AND PIPES
CLEANING YEAR
SAFETY COMPONENTS
FLAME SENSOR
CLEANING YEAR
GAS PRESSURE SWITCH
FUNCTIONAL INSPECTION YEAR
VARIOUS COMPONENTS
ELECTRIC MOTORS
COOLING FAN CLEANING, BEARING NOISE CHECK YEAR
MECHANICAL CAM
CHECK OF WEAR AND OPERATION, GREASING OF SLIDING BLOCK AND SCREWS YEAR
LEVERS/TIE-RODS/BALL JOINTS
CHECK OF ANY WEAR, COMPONENT LUBRICATION YEAR
ELECTRICAL SYSTEM
CHECK OF CONNECTIONS AND TERMINAL TIGHTENING YEAR
INVERTER
COOLING FAN CLEANING AND TERMINAL TIGHTENING YEAR
CO PROBE
CLEANING AND CALIBRATION YEAR
O2 PROBE
CLEANING AND CALIBRATION YEAR
COMBUSTION HEAD EXTRACTION
KIT
CHECKING WEAR AND OPERATION YEAR
FUEL LINE
GAS FILTER
REPLACING THE FILTERING ELEMENT YEAR
HYDRAULIC/GAS SEALS
CHECK OF ANY LEAKAGES YEAR
COMBUSTION PARAMETERS
CO CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
CO2 CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
BACHARACH SMOKE INDEX
CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP n.a.
NOX CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
IONISATION CURRENT CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
SMOKE TEMPERATURE CONTROL
COMPARISON WITH VALUES RECORDED AT SYSTEM START-UP YEAR
GAS PRESSURE REGULATOR
PRESSURE MEASURED AT START-UP YEAR
IMPORTANT
In case of heavy-duty operation or when using special fuels, the maintenance intervals must be reduced adapting them to the real
operating conditions, according to the indications of the maintenance technician.
23 / 32
0006160502_202306
ENGLISH