baltur SPARK 35LX, Инструкция по установке, использованию и обслуживанию

Страница: 51 / 60

MAINTENANCE
Analyse combustion gases and check that the emission values
are correct at least once a year, in compliance with current law.
Carry out the following operations at the end of the heating sea-
son:
• Clean air dampers, the air pressure switch with pressure port
and the relevant pipe (if fitted).
• Check the electrode condition. Replace them, if necessary.
• Have the burner and the chimney cleaned by specialised per-
sonnel (stove repairer); a clean burner is more efficient, lasts
longer and is quieter.
• Check that the fuel filter is clean. Replace it, if necessary.
• Check that all components of the combustion head are in good
condition, have not been deformed and are free from deposi-
ts deriving from the installation environment and/or from poor
combustion.
• Clean the photocell. Replace it, if necessary.
ENGLISH
21 / 28
0006080843_201604