baltur BTL 14, Инструкция по установке, использованию и обслуживанию

Страница: 53 / 60

ENGLISH
23 / 28
0006080871_201711
MAINTENANCE TIME
COMBUSTION HEAD
ELECTRODES
VISUAL CHECK, CERAMIC INTEGRITY. END GRINDING, CHECK DISTANCE, CHECK ELECTRICAL
CONNECTION
YEARLY
FLAME DISK INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING YEARLY
COMBUSTION HEAD
COMPONENTS
INTEGRITY VISUAL CHECK FOR ANY DEFORMATIONS, CLEANING YEARLY
LIQUID FUEL NOZZLES REPLACEMENT YEARLY
INSULATING SEAL VISUAL INSPECTION OF LEAK TIGHTNESS AND POSSIBLE REPLACEMENT YEARLY
AIR LINE
AIR GRILLE/SHUTTERS CLEANING YEAR
AIR SHUTTER BEARINGS GREASING, (NOTE: apply only to burners with bearings to be greased) YEAR
FAN FAN AND SCROLL CLEANING, DRIVE SHAFT GREASING YEAR
AIR PRESSURE SWITCH CLEANING YEAR
AIR PRESSURE PIPES AND
OUTLET
CLEANING YEAR
SAFETY COMPONENTS
FLAME SENSOR CLEANING YEAR
VARIOUS COMPONENTS
ELECTRIC MOTORS COOLING FAN CLEANING, BEARING NOISE CHECK YEAR
MECHANICAL CAM CHECK OF WEAR AND OPERATION, GREASING OF SLIDING BLOCK AND SCREWS YEAR
LEVERS/TIE-RODS/BALL
JOINTS
CHECK OF ANY WEAR, COMPONENT LUBRICATION YEAR
ELECTRICAL SYSTEM CHECK OF CONNECTIONS AND TERMINAL TIGHTENING YEAR
INVERTER COOLING FAN CLEANING AND TERMINAL TIGHTENING YEAR
CO PROBE CLEANING AND CALIBRATION YEAR
O2 PROBE CLEANING AND CALIBRATION YEAR
FUEL LINE
HOSES REPLACEMENT 5 YEARS
PUMP FILTER CLEANING YEAR
LINE FILTER FILTERING ELEMENT CLEANING / REPLACEMENT YEAR
COMBUSTION PARAMETERS
CO TEST COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT START-UP YEAR
CO2 TEST COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT START-UP YEAR
TEST OF FUMES ACCORDING
TO BACHARACH INDEXES
COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT START-UP YEAR
NOX TEST COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT START-UP YEAR
FUME TEMPERATURE
TESTING
COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT START-UP YEAR
OIL DELIVERY/RETURN
PRESSURE TESTING
COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT START-UP YEAR
IMPORTANT
In case of heavy use or particular fuels, the maintenance frequency must be increased and adapted to the use conditions according to the
maintenance technician's indications.