MODEL: HP200LP
MODEL: RH31LT
MODEL: HP200LPWF
Rambo
®
HIGH PRESSURE BURNER
INSTALLATION & OPERATING INSTRUCTIONS
The appliance should be installed in accordance with the following:
AGA installation codes for gas building equipments;
Manufacturer’s installation instructions;
Local gas fitting regulations;
Municipal building codes; and
Any
other
relevant
statutory regulation.
The appliance must be installed, serviced and removed by an authorised person only.
IMPORTANT:
Carefully read and understand this Installation & Operating Instruction booklet in full
Familiarise yourself with the appliance BEFORE connecting the appliance to the gas cylinder
Retain this manual for future reference
You MUST purchase a suitable regulator and hose assembly
REGULATOR AND HOSE ASSEMBLY DETAILS
This appliance must be connected to a certified hose and regulator assembly to ensure safe operation as
follows: Propane Gas regulator fitted with a POL type inlet fitting, outlet pressure of 100 kPa and Certified to
AG205 and an 8mm High Pressure hose (maximum length 1.8 metres) certified to AS/NZS 1869 class ‘C’ or
‘D’. The hose outlet fitting required to ensure compatibly with the inlet connection of this appliances is ¼” BSP
female threaded nut and 60º inverted flare.
THE CORRECT ASSEMBLY MUST BE USED - DO NOT USE ADAPTORS
The use of any equivalent certified hose/regulator assembly compliant with the requirements above is
FOR OUTDOOR USE ONLY
