baltur BT 250 DSG K Series Скачать руководство пользователя страница 3

2

L' Amministratore delegato
   Dott. Riccardo Fava

Dichiarazione del Costruttore

D

ichiariamo che i bruciatori di gas, gasolio, olio combustibile e misti (gas/gasolio oppure gas/olio combustibile)

sono da noi prodotti a regola d’arte in conformità alle Norme CE - CEI - UNI vigenti al momento della costruzione.

• La BALTUR garantisce la  certificazione “CE” sul prodotto solo se il bruciatore viene installato  con la rampa

gas “CE” fornita dalla BALTUR e con accessori di linea gas certificati “CE” (forniti su richiesta).

NOTA: la presente dichiarazione non è valida, relativamente alla Norma CE oppure UNI, per i bruciatori di gas e per la
parte gas dei bruciatori misti (gas/gasolio oppure gas/olio combustibile) quando, gli stessi, ci vengono ordinati non

conformi alla Norma CE oppure UNI, perché destinati ad uso speciale, non previsto nelle norme sopra indicate.

Manufacturer’s declaration

We hereby declare that our gas, light oil, heavy oil, and combination (gas/light oil or gas/heavy oil) burners

are manufactured in conformance with current CE, CEI and UNI standards.

• BALTUR guarantees  the “CE” certification provided that the burner is coupled to the “CE” gas train supplied

by BALTUR and the “CE” gas line accessories (on  request).

NOTE: this declaration is not valid with regard to EC or UNI Standards for gas burners or the gas part of duel-
fuel burners (gas/light oil or gas/heavy oil) when such burners have been ordered in non-compliance with the EC
Standard or Italian UNI Standard because they are to be used for special purposes not provided for in the
above-mentioned standards.

Declaración del fabricante

Declaramos que la empresa fabrica los quemadores de gas, gasóleo, fuel y mixtos (gas/gasóleo o

gas/fuel) ajustándose a las Normas CE - CEI - UNI vigentes en el momento de su fabricación.

• La firma “BALTUR” garantiza la certificación “CE” sombre el producto sólo si el quemador viene instalado

con la rampa gas “CE” suministrada por la “BALTUR” misma  y con los accesorios de linea gas certificados
“CE” (suministrables a pedido).

NOTA: la presente declaración no tiene validez, respecto a la Norma CE o UNI, para los quemadores de gas y
para la parte de gas de los quemadores mixtos (gas/gasóleo o gas/fuel) cuando, los mismos, se piden no
conformes a la Norma CE o a la norma italiana UNI, porque están destinados a un uso especial, no previsto en
las normas arriba mencionadas.

Déclaration du constructeur

Nous déclarons que les brûleurs à gaz, fioul, fioul lourd et mixtes (gaz/fioul ou gaz/fioul lourd) sont produits

selon les règles de l’art, conformément aux Normes CE – CEI – UNI en vigueur au moment de la fabrication.

• La BALTUR garantit la certification “CE” seulement si les brûleur sont installé avec les rampes de gaz “CE”

produites par la BALTUR et les accessoires de ligne gaz “CE” (fournis sur demande).

NOTE: la présente déclaration n’est pas valable, correspondante à la Norme CE ou bien UNI, pour les brûleurs
à gaz et pour la partie gaz des brûleurs mixtes (gaz/fioul ou bien gaz/fioul lourd) lorsque, ces derniers, nous sont
commandés sans être conformes à la Norme CE ou bien à la norme italienne UNI, parce qu’ils sont destinés à
une utilisation spéciale qui n’est pas prévue par les normes indiquées ci-dessus.

Herstellererklärung

Wir erklären, dass die Gas-, Heizöl-, Schweröl- und Wechselbrenner (Gas/Heizöl oder Gas/Schweröl) von

uns fachgerecht und in Übereinstimmung mit den zum Zeitpunkt der Fertigung geltenden Normen CE - CEI -
UNI hergestellt wurden.

• Die “CE”-Zertifizierung der von BALTUR hergestellten Produkte ist nurin Verbindung mit einer von BALTUR

gelieferten CE-Gasarmatur und  unter Verwendung von  CE-zertifizierten Bauteilen in der Gaszufürhrung
gültig.

HINWEIS: Die vorliegende Erklärung im Hinblick auf die EU- oder UNI-Normen ist nicht gültig für Gasbrenner
und für den Gasteil von Wechselbrennern (Gas/Öl oder Gas/Schweröl), wenn solche bei uns ohne Konformität
mit den EU-Normen oder mit der italienischen Norm UNI bestellt werden, weil sie eine für spezielle Verwendung
bestimmt sind, die von den oben genannten Normen nicht vorgesehen ist.

0006080197 Rev.1

Содержание BT 250 DSG K Series



























































































Отзывы: