baltur 67230020, Инструкция по установке, использованию и обслуживанию

Страница: 57 / 72

ENGLISH
21 / 34
0006160209_201702
LME73 GAS BURNER CONTROL DEVICE ...
for more information, refer to the machine quick Guide supplied with the manual.
↵
Info
The lock out reset push button 1) (info push button) (EK) is the key element to reset the burner control and activate/
deactivate the diagnostics functions.
The warning light (LED) is the key element for visual diagnostics.
RED
YELLOW
GREEN
The lock out reset push buttons (EK) and the multicolour warning light (LED) are both located on the control panel
There are two diagnostics choices:
1. Visual diagnostics: indication of the operating status or diagnostics of the lock out cause.
2. Diagnostics: display and operating unit through BCI up to AZL2...
') visual diagnostics: during normal operation, the various operating statuses are indicated by colour codes according to the colour table
below.
OPERATING STATUS INDICATIONS
During ignition, the following status indications are provided as per the table below:
Colour code table for the warning light (LED).
Condition Colour sequence Colours
Waiting conditions TW, other intermediate conditions . . . . . . . . No light
Ignition phase Intermittent yellow
Correct operation, current strength of flame detector above the
minimum allowed
Green
Incorrect operation, current strength of flame detector below the
minimum allowed value
Intermittent green
Decrease in power supply voltage Alternating Yellow
and Red
Burner shut down condition Red
Fault indication (see colour key) Intermittent red
Extraneous light upon burner start-up Alternating Green
and Red
Quick flashing for diagnostics Quick flashing red
NO LIGHT. RED. YELLOW. GREEN.
Equipment or
programming
Safety time Pre-
ventilation
time
Pre-ignition Post-
ignition
Time
between 1st
stage valve
and 2nd
stage valve
opening
Air damper
opening
cycle time
Air damper
closing
cycle time
s s s s s s s
LME73... 3 30 2 2 11 30 30