baltur 67230020, Инструкция по установке, использованию и обслуживанию

Страница: 59 / 72

ENGLISH
23 / 34
0006160209_201702
0002935021
TBG 110 LX P / LX PN (V)
TBG 110 LX ME / LX MC
TBG 140 LX P / PN (V)
TBG 140 LX ME / LX MC
TBG 200 LX P / LX PN (V)
TBG 200 LX ME / LX MC
TBG 260 LX ME
TBG 360 LX ME
TBG 80 LX P / LX PN (V)
TBG 80 LX ME / LX MC
A
A
A
B
B
B
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
4
4
4
5
5
5
C
1 - Ionisation electrode
2 - Ignition electrode
3 - Flame disc
4 - Mixer
5 - Gas delivery pipe
A B
TBG 80 LX ME 5 8
TBG 110 LX ME 5 5
TBG 140 LX ME 5 5
TBG 200 LX ME 5 5
TBG 260 LX ME 5 5
AIR REGULATION ON THE COMBUSTION HEAD
The burner is supplied with the following combustion head regulation:
• head/disk distance (x) set to 40 mm
• value of protrusion of mobile terminal (Y) set to 115 mm, corresponding to the fastening position (1).
In case you want to supply a burner rated thermal output equal to 12 MW, it is necessary to fix the mobile terminal (10) in correspondence
of position (2), corresponding to Y=145 mm.
In this case, NOx emissions will be slightly higher but still within the limit value of 80 mg/kWh with O2=3% and with hot water up to a
maximum temperature of 90° C as thermal fluid.
DIAGRAM FOR REGULATING THE COMBUSTION HEAD AND THE ELECTRODE DISK DISTANCE