3
#27624
Assembly Diagram
Identify and Separate all the Parts and Hardware.
Illustration # 1
R
EAD
T
HROUGH
I
NSTRUCTIONS
FROM
BEGINNING
TO
END
BEFORE
STARTING
TO
ASSEMBLE
UNIT
.
1.)
2.)
4.) Attach Shelf (P-4) to the one inch support bars on the Uprights using one Panel Clip (D) and two
Wood Screws (F) on each bar. Position the Shelf (P-4) on the support bars and line up the predrilled
holes in the Shelf and the punched holes in each Panel Clip (D) then attach with Wood Screws (F).
Screw in four Casters (A) into the bottom of the
Base (P-1) as shown in Illustration # 1. Tighten
with Caster Wrench (G).
3.) Insert the Left Support (P-2) and the Right Support (P-3) into
the cut outs in the top of the Base (P-1). Use a Washer (C) and
and an Allen Recess Bolt (B) in each of the six holes under the
Base (P-1) to secure the Uprights as shown in Illustration #2.
Tighten Allen Recess Bolts (B) using Allen Wrench (E).
P-1
A
Illustration # 3
Illustration # 2
P-3
P-2
B
C
P-1
F
D
P-4
