4
Adjustable Height Wall Mount Arm
Assembly Diagram
Identify and Separate all the Parts and Hardware.
Illustration # 1
R
EAD
T
HROUGH
I
NSTRUCTIONS
FROM
BEGINNING
TO
END
BEFORE
STARTING
TO
ASSEMBLE
UNIT
.
1.)
2.)
P-1
Should you require assistance during assembly,
please call our Customer Service Department
Monday - Friday 8 a.m. - 5 p.m.
Central Standard Time
1-800-749-2258
Missing Parts or UPS Damaged Parts
For Your Convenience you can
EMAIL us at
24HOURS 7 DAYS A WEEK
Insert the Arm (P-1) in between the two horizontal
tubes at the top of the Yoke (P-2). Secure in
place using the Arm Pin (B) and Knob (A) as
shown in
Illustration #1.
3.) Slide the Yoke (P-2) assembly’s vertical
tubes into the receiver tubes on the Adjustable
Height Wall Mount frame. Attach the Yoke
Strap (P-3) to the bottom of the Yoke (P-2)
and secure with two Washers (H) and two
Screws (D). Use the Small Allen Wrench (H)
to tighten screws as shown in Illustration #2 and
2A detail.
P-3
H
Illustration # 2
P-2
2A Detail
D
P-2
B
A
