Balluff IO-Link BES M12MC1-YIC10F-S04G, Руководство пользователя

Страница: 55 / 86

www.balluff.com 25 english
Reset the sensor to its factory default setting using the
system command (0x0002) Restore Factory Settings
(0x82). By default, the additional functions Counter func-
tions are disabled.
For a listing of all parameters that can be set via IO-Link,
see section IO-Link interface: Parameters, commands and
events on page 19.
Parameter Factory setting Description
Teach-in Channel 0x00 Manufacturer / vendor specific default (BDC 1)
Switch Point Logic 0x00 High active
Switch point mode 0x01 Single Point Mode
Set Point 1 Variable Manufacturer calibrated rated switching distance
Set Point 2 0000
Pin Function Selection PIN 4 0x00 Sensor Output
Pin Function Selection PIN 2 0x01 Teach-in Input
Physical Input Debounce PIN 2 0x12C (300) 300 ms debounce time
Output Type PIN 4 0x03 Push-Pull
Output Type PIN 2 0x03 Push-pull (not used, PIN 2 is by default an input.)
Output Function PIN 4 0x00 N.O.
Output Function PIN 2 0x00 N.O. (not used, PIN 2 is by default an input.)
Device Access 0 All functions enabled
Application Specific Tag „***“
Function Tag „***“
Location Tag „***“
Switch Counter Mode 0x00 OFF
Switch Counter Limit 0x0000 OFF
Switch Counter Debounce 0x0000 OFF
Switch Counter Startup Delay 0x0000 OFF
Switch Counter Upper Limit High 0x0000 OFF
Switch Counter Upper Limit Low 0x0000 OFF
Switch Counter Lower Limit High 0x0000 OFF
Switch Counter Lower Limit Low 0x0000 OFF
Tab. 9-1: Factory setting
9
Factory setting
BES M12M_1-YIC_0_-S04G
Inductive sensors