Balluff IO-Link BES M12MC1-YIC10F-S04G, Руководство пользователя

Страница: 45 / 86

www.balluff.com 15 english
6
Basic functions (continued)
6.6 IO-Link process data
6.6.1 Process Data In
The master receives 3 bytes of process data from the
sensor (M-Sequence type: TYPE_2_V).
Byte 0 Byte 1 Byte 2
23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CountV
alue /
Fr
equency (MSB)
CountV
alue /
Fr
equency (LSB)
Count limit/Speed ok
Teach err
or
Teach successful
Teach active
Speed too high
Speed too low
out of range
BDC1
Byte 2
Bit Parameter name Description Value
1 0
0 BDC1 Binary Data Channel 1: Contains
object detection information
Active Inactive
1 Out of range Collision danger Sensor-Target,
target outside detection range
Target too close/far
away: Teach procedure
blocked
Target is in detection
range.
2 Switch Count: Speed
too low
Switch count feature: Current swit-
ching frequency is less than the set
limit. (Lower Limit)
Active Inactive
3 Switch Count: Speed
too high
Switch count feature: The current
switching frequency is greater than
the set limit. (Upper Limit)
Active Inactive
4 Teach active Teach procedure active Teach procedure active Teach procedure not
active
5 Teach successful Teach procedure ended successfully Last teach procedure
completed successfully
No teach procedure yet
completed or last teach
procedure was not
successfully completed.
6 Teach error Teach procedure not successful Last teach procedure
not completed success-
fully.
No teach procedure yet
completed or last teach
procedure was success-
fully completed.
7 Switch Count: Count
limit / Speed ok
Switch count feature: The current
switching frequency is within the
limits. (Lower and Upper Limit)
Active Inactive
Tab. 6-8: Output data
BES M12M_1-YIC_0_-S04G
Inductive sensors