Balluff BTL6-U101-M****-A-S4 series, Руководство пользователя

Страница: 41 / 124

www.balluff.com 15 english
6
IO-Link interface (continued)
6.5 System Command
Different commands have been implemented in the BTL
which can be reached via the parameter System
Command on Index 2, Subindex 0. If a System Command
is transferred to the BTL, the command triggers the
desired action if permitted in the current application state.
Value Designation Description
0x80 Device Reset BTL restarts.
0x82 Factory Reset All parameters (except Index 0x55: IO Link Variant config) are reset to
factory settings.
0xE0 Set Offset Value Takes over the current position of the 1st magnet so that 0 it output at this
location with immediate effect.
0xE1 Clear Offset Value to 0 Resets the offset to the value 0.
Tab. 6-4: System commands
6.6 Parameter data
Index Subindex Parameters Size Access Parameter
Management
0×000C (12
10
) 0 Device Access Locks (see sec. 6.6.1) 2 bytes Read/Write Yes
0×000D (13
10
) 0, 1, 2 Profile Characteristic (see sec. 6.6.2) 4 bytes Read Only Not available
0×000E (14
10
) 0 PD Input Descriptor (see sec. 6.6.3) 3 bytes Read Only Not available
0×0018 (24
10
) 0 Application Specific Tag (see sec. 6.6.4) 32 bytes Read/Write Yes
0×0051 (81
10
) 0, 1, 2, 3, 4 Event Configuration (see sec. 6.6.6) 1 byte Read/Write Yes
0×0052 (82
10
) 0, 1, 2, 3, 4, 5 Temperature (see sec. 6.6.7) 5 bytes Read Only Not available
0×0055 (85
10
) 0 IO Link Variant config (see sec. 6.6.8) 1 byte Read/Write No
0×00C1 (193
10
) 0 Null point offset (see sec. 6.6.5) 4 bytes Read/Write Yes
0×00C3 (195
10
) 0 Output Characteristic (see sec. 6.6.9) 1 byte Read/Write Yes
0×00C9 (201
10
) 0, 1, 2 Magnet Mode (see sec. 6.6.10) 2 bytes Read/Write Yes
0×00CA (202
10
) 0, 1 to n
1)
PD In Mapping (see sec. 6.6.11) n bytes
1)
Read/Write Yes
1)
n corresponds to the number of process data variables for the respective
type.
Tab. 6-5: Parameter data of IO-Link interface
BTL6-U101-M _ _ _ _ -A/B/Y/Z-S4
Magnetostrictive Linear Position Sensor – Rod Style