Balluff Network Interface Profibus
www.balluff.com
4
2
Safety
2.1.
Intended use
This guide describes The BNI PBS-
… serves as a decentralized input/output module for
connecting to a Profibus network.
2.2.
General safety
notes
Installation and startup
Installation and startup are to be performed only by trained specialists. Any damage
resulting from unauthorized manipulation or improper use voids the manufacturer’s
guarantee and warranty.
The Device is in accordance with EMC Class A. Such equipment may generate RF noise.
The operator must take precautionary measures accordingly.
The Device must be powered only using an approved power supply (see section 4
“Technical data”). Only approved cable may be used.
Material resistance
The BNI PBS-
…has good chemical and oil resistance.
If aggressive media are used, the material resistance must be tested for this application.
Operating and testing
The operator is responsible for observing local prevailing safety regulations.
When defects and non-clearable faults in the Device occur, take it out of service and secure
against unauthorized use.
Approved use in ensured only when the housing is fully installed.
2.3.
Meaning of the
warnings
Note!
The pictogram
used with word “Caution“ warns of a possible hazardous situation
affecting the health of persons or equipment damage. Ignoring these warnings can
result in injury or equipment damage.
Always observe the described measures for preventing this danger
.
