www.balluff.com
25
4
IO-Link Interface
User color
FC
hex
This register sets the value of the user defined color. Values from 0x00 to 0xFF are accepted
for each channel. This register can be accessed through the subindices 0, 1, 2 or 3.
Reading/writing the subindex 0 the whole 3 byte user color data can be accessed. Subindex 1,
2 and 3 contains the red, green and blue channel data for the user color.
Note
This register is available from software version 2.1.
Byte
0
1
2
Sub
Index
1
2
3
D
es
cri
pt
ion
User defined color, red
channel
User defined color, green
channel
User defined color, blue
channel
Limit type
FD
hex
The limit registers are evaluated either as a percent value or as an absolute value. The Limit
type register sets the type of the evaluation.
0x00 – Limit type is given in a percent value
0x01 – Limit type is given in an absolute value
Note
This register is available from software version 2.1.
Buzzer type
FE
hex
This register is available only for BNI IOL-802-000-Z037. The type of the buzzer sound can be
set in this register. This register is available only for BNI IOL-802-000-Z037.
0 = continuous sound
1 = 1 Hz chopped sound
2 = 5 Hz chopped sound
3 = 3 short beep, 2 sec pause
4.4
Errors
Error Code
Description
0x8011
Index not available
0x8012
Subindex not available
0x8023
Access Denied
0x8030
Parameter Value out of Range
0x8033
Parameter length overrun
0x8034
Parameter length underrun
4.5
Events
IO-Link Revision 1.0
Event Code
Description
0x5112
Low supply voltage (US)
IO-Link Revision 1.1
Event Code
Description
0x5111
Low supply voltage (US)
