Balluff BNI EIP-502-105-Z015, Руководство пользователя

Страница: 12 / 20

www.balluff.com
11
6 Process Data
6.1. Process Data
Inputs
There are 200 bytes of Input data. Have a look at the tables below to see the mapping of the
process data inputs.
Byte Modul part Description
0
…7
Standard I/O ports Process data inputs on standard Inputs
8…55
IO-Link Port 1 Process data inputs on IO Link Port 1
56
…103
IO-Link Port 2 Process data inputs on IO Link Port 2
104
…151
IO-Link Port 3 Process data inputs on IO Link Port 3
152
…199
IO-Link Port 4 Process data inputs on IO Link Port 4
Standard Input
Data
Byte
Bit
Description
7 6 5 4 3 2 1 0
0 I32 I34 I22 I24 I12 I14 I02 I04
Input data
I04

Input on port 0 pin 4
If a port is configured as an IO
Link port, result is 0.
1 I72 I74 I62 I64 I52 I54 I42 I44
2 S3 S2 S1 S0
Short circuit status
Short circuit between Pin 1 and 3
on stated port
3 S7 S6 S5 S4
4 O22 O34 O22 O24 O12 O14 O02 O04
Overload status
O04

Overload on port 0 pin 4
Only if port is configured as output
5 O72 O74 O62 O64 O52 O54 O42 O44
6 0 0 0 0 0 0 PS PA
Power status
PS: Sensor power
PA: actor power
7 0 0 0 0 0 0 0 0 Reserved
IO Link Input Data
Byte
Bit
Description
7 6 5 4 3 2 1 0
8
…
39
IO Link Port 1 Input data
40 0 0 0 0 0 0 DC IOL
IO-Link status
IOL: Port in IO Link Mode
DC: Device connected
0: reserved
41 0 0 0 0 0 0 0 VF
IO-Link Error
VF: Validation failed
0: reserved
42 Vendor ID 1
Vendor ID
43 Vendor ID 2
44 Device ID 1
Device ID 45 Device ID 2
46 Device ID 3
47 Error Code
Event 1 48 Additional Code
49 Additional Code
50 Error Code
Event 2 51 Additional Code
52 Additional Code
53 Error Code
Event 3 54 Additional Code
55 Additional Code
…
The data of the other IO Link ports has the same structure and follows here