Balluff Network Interface / CC-Link BNI-CCL-104/202/302/305-100-Z001
5
3
Getting Started
3.2 Mechanical
connection
The module is attached using 2 M6 screws and 2 washers.
3.3 Supply voltage
connection
Power In (7/8 Mini- Change 5 pin, male)
PIN
Signal
Description
1
0 V
Actuator supply
2
0 V
Sensor and bus communication supply
3
FE
Function Ground
4
+24V
Sensor and bus communication supply
5
+24V
Actuator supply
Power Out (7/8 Mini- Change, 5 pin, female)
PIN
Signal
Description
1
0 V
Actuator supply
2
0 V
Sensor and bus communication supply
3
FE
Function Ground
4
+24V
Sensor and bus communication supply
5
+24V
Actuator supply
−
24 V DC.
−
Provide sensor/bus power and actuator power from separate power sources if possible.
−
T otal current <9A. The total current of all modules may not exceed 9A even when daisy
chaining the actuator supply.
Function ground
Note!
The FE connection from the housing to the machine must be low-impedance and
kept as short as possible.
