Balluff BIS M-62 Series, Руководство пользователя

Страница: 93 / 198

BIS M-62_ MANUAL
86
5
Message Router Object (0x02)
This object has no supported attributes.
Assembly Object (0x04 - 3 Instances)
Class Attributes
Attribute ID Name / Description
Data
Type
Default
Data
Value
Access
Rule
1 Revision UINT 1 Get
2 Max Instance UINT 81 Get
Instance 0x64 Attributes (Input Instance)
Attribute ID Name / Description
Data
Type
Default
Data
Value
Access
Rule
3
Status Information:
Get Bitmap of Consume Instances with Data DINT 0
Bitmap of Produce Instances with Data DINT 0
User Datagram Protocol (UDP) I/O Sequence Number Handshaking
The data producing device increments the data sequence number by one with the
transmission of each new serial data packet. Valid sequence numbers are 1-65535. After the
consuming device has processed the data, it must echo the sequence number in the
handshake to allow the producing device to remove the data from the queue. This is required
for I/O communications because UDP is not guaranteed to arrive in order.
If the Node ID number is passed as part of the I/O message, the message is stored to the
appropriate location in the Modbus RTU table. Because communications are asynchronous,
the Node ID number is also stored as part of the output data. It is the responsibility of the
PLC programmer to make sure the proper request lines up with the proper response if the
BIS M-626 is used as a request/response device.
Instance 0x65 Attributes (Input Instance 2)
Attribute
ID
Name / Description Data Type
Default Data
Value Access
Rule
3
Serial Produce Data:
Get
Consume Data Seq. Number
Handshake
UINT 0
Produce Data Sequence
Number
UINT 0
Node 1 Serial Produce Data
Size
UINT 0
Node 1 Serial Produce Data WORD[100]
All 0’s