Balluff BIS M-62 Series, Руководство пользователя

Страница: 68 / 198

CONFIGURATION METHODS
61
4
4 CONFIGURATION METHODS
There are several configuration methods available for your processor unit depending on the
interface type and application:

Configuration Tag

Configuration Tools: Balluff Dashboard™ and C-Macro Builder™

Command Protocol
4.1 CONFIGURATION TAG
A configuration tag is included with your BIS M-62_ processor unit. This can be used to reset
all BIS M-62_ processor units to their factory default configuration settings.
For Subnet16™ models (BIS M-62_ RS485 models), this tag can also be used to set the
Node ID of each processor unit in the network.
Figure 42 - BIS M Series Configuration Tag
4.1.1 Node ID Configuration Using Configuration Tags
Only RS485-based RFID processor
units can be connected to a Gateway’s Subnet network
and each must be assigned a unique Node ID value between 1 and 16.
When an RFID processor unit is connected to the Gateway’s Subnet network, the Gateway
will query the new processor unit to obtain certain configuration values (specifically the Node
ID number). If the Gateway does not detect a Node ID conflict, it will “allow” the RFID
processor unit onto the Subnet network.
By using the
BIS M Series Configuration Tag that is included with each RS485-based BIS
M-62_ processor unit, the Node ID value can be dynamically assigned by the Gateway or
can be manually assigned by the user.
For the Gateway to dynamically assign a Node ID value to a processor unit, the processor
unit must first be initialized with the Node ID value of zero. This is the equivalent of having no
Node ID assigned.