Balluff BIS C-87 Series Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 34

Balluff BIS C-87 Series Скачать руководство пользователя страница 6

BIS C-87_

Handheld Programmer

6

2.1 Proper use

2.2 General safety

notes

2.3 Notes on using

and returning
rechargeable
batteries

2.4 Meaning of the

warning notes

The BIS C-87_ Handheld Programmer is a component of the BIS C Identification System.
Within the Identification System it checks, corrects, or initializes data carriers.
The Handheld Programmer may be used only for this purpose in an industrial environment
corresponding to Class A of the EMC Law.
This description is valid for Handheld Programmers in the series BIS C-87_-1-008-….

Startup

Startup is to be performed only by trained specialists. Any damage resulting from unauthorized
manipulation or improper use voids the manufacturer's guarantee and warranty.
When starting up, observe the instructions in the manuals from PSION Teklogix GmbH.
The Handheld Programmer is to be operated only using the power supply approved for the
device

(see "Technical data" on page 29)

.

Operation and testing

The operator is responsible for ensuring that locally applicable safety regulations are observed.
In the event of defects and non-correctable faults in the Identification System, take the system
out of service and secure it from unauthorized use.

Attention!

Improper use, charging, disposal, or replacement of the rechargeable battery may

result in an explosion! Replace the rechargeable batteries only with the same type or a

type recommended by the manufacturer.

Note

Every user is legally obligated by the German Battery Ordinance to return all regular or

rechargeable batteries that have been used or spent. Disposal with the household

waste is prohibited. Old batteries and rechargeable batteries can be returned without

charge at your municipal collection point and anywhere that batteries and rechargea-

ble batteries of the type in question are sold. You can also return the included batte-

ries to the following address (with sufficient postage) after using them:

Balluff GmbH, Schurwaldstraße 9, 73765 Neuhausen a.d.F., Germany

Attention!

Use only Balluff-approved power supplies.

Attention!

The pictogram used with the word "Attention" warns of a situation that could harm

someone's health or damage equipment. Failure to observe these warning notes

may result in injury or damage to equipment.

Always take the described measures to prevent hazardous situations.

►

Safety

2

«
...
4
5
6
7
8
...
»

Содержание BIS C-87 Series



































Отзывы:

Нет отзывов