Balluff BIS C-87 Series Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 34

Balluff BIS C-87 Series Скачать руководство пользователя страница 4

BIS C-87_

Handheld Programmer

4

1.1 CE Declaration of

Conformity and
user safety

1.2 Scope of delivery

1.3 About this

manual

1.4 Structure of the

manual

Declaration of Conformity

This product was developed and produced in compliance with applicable European
standards and directives.

Note

You can request a Declaration of Conformity separately.

For additional safety instructions, refer to the

"Safety" section on page 6

Included in the scope of delivery:

BIS C-87_ Handheld Programmer

–

BIS software CD

–

AC adapter

–

Operating instructions in printed form (GER/ENG)

–

This manual describes operation of the BIS C-87_ Identification System together with the
"Workabout Pro" handheld computer made by PSION Teklogix GmbH

The present manual does not describe:

Startup, operation, and care of the "Workabout Pro" handheld computer,

–

Installation and operation of accessories and expansion devices,

–

Docking station and device interfaces.

–
Refer to the manuals from PSION Teklogix GmbH

on the enclosed CD

for this information.

You can find the current documentation on the Internet at

http://www.psion-teklogix.com/

The manual is organized so that the sections build on each other.
Section  2: Basic safety information.
Section  3: First steps (starting the software).
Section  4: Processing data carriers and using files.
Section  5: Connecting the Handheld Programmer to the PC.
Section  6: Technical data for the Identification System.

User instructions

1

«
...
2
3
4
5
6
...
»

Содержание BIS C-87 Series



































Отзывы:

Нет отзывов