manualshive.com logo in svg

Balluff BIS C-87 Series, Техническое описание, Руководство пользователя, Страница: 10 / 34

Поделиться
Скачать
Balluff BIS C-87 Series Скачать руководство пользователя страница 10

BIS C-87_

Handheld Programmer

10

Getting started

3

3.3  COLD RESET or 

battery 
replacement 

Saving your own 
profile with "Total 
Recall"

3.4  Turning the 

Handheld 
Programmer on/
off

Turning on

Turning off

3.5  Keyboard, 

display, and 
operating 
concept

3.6  Creating your 

own operating 
interface 

Note

Removing the battery pack or performing a cold reset will delete data, drivers, and 

settings from the unit's RAM! 

The 

"Total Recall"

 program can be used to save the personal profile so that it is 

automatically loaded after a cold reset. 

The 

"Total Recall"

 program is located in the 

"Control Panel"

 of the Workabout Pro.

To open the Control Panel: <Windows Start> - <Settings> - <Control Panel>.

 

–

Double-click on the <Total Recall> program 

 

–

(or select it and in the upper left corner select <File> and <open>).
A new window opens; click <Next>; the following window opens:

 

–

Change <Profile Name> to <BISM>.

 

–

Change <Profile Type> to <AutoRestore for this device only>.

 

–

Keep <Profile Location> (should be set to <Flash Disk>).

 

–

Click on <Next>.

 

–

<All Files> window opens. Do not change anything. Click on <Next>.

 

–

<View Selections> window opens. Do not change anything. Click on <Next>.

 

–

Click on <Backup>.

 

–

In the <Perform the Operation> window click on <Finish1>.

 

–

Requirements:

Supply voltage is present (battery pack inserted and charged, device is in the docking station 

 

–

or power supply is connected).

Attention!

This is a Class A product. When using this product indoors, the device may cause RF 

interference, requiring the user to take appropriate measures.

Hold down 

 

►

<Enter>

 for at least 1 second. 

As soon as the LED flashes green, release the 

<ENTER>

 key again.

The start screen <Today> is displayed.

 

⇒

Note

If the device was used previously, it can happen that it is in Suspend mode; pressing 

<ENTER>

 reactivates the unit. The screen you were working in before the computer 

switched to Suspend mode is displayed again.

 – Suspend

Press 

 

►

<FN>

 (blue) and then 

<ENTER> 

to shut off the WORKABOUT PRO

 

or
Select 

 

►

"Shutdown > Suspend"

 from the start menu.

Familiarize yourself with the operating concept and characteristics of the WORKABOUT PRO. 
The operating manual can be found on the included CD or on the Internet at: 

http://www.psion-

teklogix.com/

 

Note

The BALLUFF.dll was developed as an independent software for creating a custom 

tailored operating interface, for the Handheld Programmer. The ordering code for this 

application is available on demand. 

Содержание BIS C-87 Series



































Отзывы:

Нет отзывов