Baldor Nextmove ESB, Руководство по установке

Страница: 11 / 98

www.supportme.net
Introduction 2-3 MN1924
2.2 Receiving and inspection
When you receive your NextMove ESB, there are several things you should do immediately:
1. Check the condition of the packaging and report any damage immediately to the carrier
that delivered your NextMove ESB.
2. Remove the NextMove ESB from the shipping container and remove all packing material. The
container and packing materials may be retained for future shipment.
3. Verify that the catalog number of the NextMove ESB you received is the same as the
catalog number listed on your purchase order. The catalog/part number is described in
the next section.
4. Inspect the NextMove ESB for external damage during shipment and report any damage
to the carrier that delivered it.
5. If the NextMove ESB is to be stored for several weeks before use, be sure that it is stored
in a location that conforms to the storage humidity and temperature specifications shown
in section 3.1.1.
2.2.1 Identifying the catalog number
Different models of NextMove ESB are available. As a reminder of which product has been
installed, it is a good idea to write the catalog number in the space provided below.
NextMove ESB catalog number:
NSB002-501 or NSB002-502
Installed in:
________________________
Date:
______
A description of the catalog numbers are shown in the following table:
Catalog
number
Description
NSB002-501 NextMove ESB controller with USB and RS232 serial connections
NSB002-502 NextMove ESB controller with USB and RS485 serial connections