2. Pull the trigger to begin the flow.
• The meter solenoid valve automatically
locks the dispensing valve in the full open
position. The trigger falls back to the
closed position.
The meter always locks in the maximum
open position.
• After the batch quantity is dispensed, the flow automatically shuts off.
NOTE
:
For RF2 and BATCH programming, the meter automatically shuts off if the trigger is
pulled and the meter does not sense any flow.
Also, in case of an emergency or to interrupt a batch, the meter is equipped with an
Emergency Override.
(See the
Emergency Override
section of this manual.)
3. The user has the option to top off the fluid at the end of a batch.
• To top off the fluid, pull the trigger to begin the flow and release it when the desired
amount has been pumped.
4. Press the button when finished. The display resets and the meter is now ready for
the next batch to be dispensed.
Batch
Size
Arrows
To return to the RF Mode from the EPM
Mode:
1. Press button twice. You’ll see the
flashing arrows indicating the meter is
communicating with the RF2 System.
2. When communication is complete, the
meter returns to the RF2 Mode and the
trigger locks.
Return to RF Mode
8
