87
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417, 834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42211 C
The water flow is low – M016 . . . . . . . . . . . . . . . . . 59
The water is too hot – M029 . . . . . . . . . . . . . . . . . . 62
This would typically show High speed voltage for Pump one. (240V)
43
This would typically show low speed voltage for Pump one. (240V)
43
Time Display . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Time Outs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Tip: If one sensor (A or B) seems to be having problems, swap the
cables of sensor A with sensor B. . . . . . . . . . . . . . . . 49
To Determine the Cause of a Blown Power Input Fuse . . . . . 19
To Disconnect the Heater . . . . . . . . . . . . . . . . . . . . 11
Too Cold - Freeze Protection . . . . . . . . . . . . . . . . . . 68
TP400/TP600 error codes and fault messages are similar to TP800/
TP900. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
TP900, TP800, TP600, TP400 . . . . . . . . . . . . . . . . . . . 1
Troubleshooting Heater Posts Resistance to Heater Housing . 35
Troubleshooting heater Resistance . . . . . . . . . . . . . . . 34
Unlocking the Panel . . . . . . . . . . . . . . . . . . . . . . . 58
Used for verifying a proper installation . . . . . . . . . . . . . 61
Verifying Incoming Voltage at the Terminal Block (240V system)
BP2000 shown (BP500 system is similar) . . . . . . . . . . . 37
Verify that there is no heater “leakage” . . . . . . . . . . . . 35
Verify there is NO continuity from the heater post to the ground/
earth. On the resistance scale, the a digital meter should read OL
(indicating infinite resistance). . . . . . . . . . . . . . . . . . 35
Verify there is NO continuity from the heater post to the heater
housing or heater current collector connection. The meter reading
shown is OL, indicating infinite resistance. . . . . . . . . . . 35
Viewing Configuration Settings . . . . . . . . . . . . . . . . . 44
Voltage Checklist . . . . . . . . . . . . . . . . . . . . . . . . 23
Warning: The Owner should test and reset the G.F.C.I. on a regular
basis to verify its function. . . . . . . . . . . . . . . . . . . . 11
Water is too Hot (OHS) – M029. . . . . . . . . . . . . . . . . 68
Water Temperature is Unknown . . . . . . . . . . . . . . . . 62
Water Temperature is Unknown . . . . . . . . . . . . . . . . 68
What Priming Mode does: . . . . . . . . . . . . . . . . . . . 77
White to Black Wires = 120V . . . . . . . . . . . . . . . . . . 37
White to Red Wires = 120V . . . . . . . . . . . . . . . . . . . 37
Index of Paragraph Topics (cont.)
Wiring Check Precautions . . . . . . . . . . . . . . . . . . . . 17
With the pump high speed ON, take a voltage reading at the AMP
receptacle on the PCB . . . . . . . . . . . . . . . . . . . . . . 43
With the pump low speed ON, take a voltage reading at the AMP
receptacle on the PCB . . . . . . . . . . . . . . . . . . . . . . 43
